THE WORLD
OF SCAME

SECTION 4.2
CONNECTING ACCESSORIES

GENERAL DESCRIPTION

For safe and reliable wiring SCAME offers a range of wire connectors, insulated wire connector strips, multi-way wire connectors and terminal strips capable of meeting all needs of present-day wiring systems in the home, office, shop or factory.

Insulated wire connectors - T85
Insulated wire connectors - T85 strips 10
Multi-way wire connectors - T85
Terminal strips - T85
Terminal strips - T140

REFERENCE STANDARDS

IEC 60998-1 (CEI 23-20)
IEC 60998-2-1 (CEI 23-21)

VERSIONS

xxxxx

INSULATED WIRE CONNECTORS - T85

The main characteristics of these devices are:

rated voltage: 450V~
capacity: 1,5 2,5 4 6 10 16 35 (mm2)
rated current: 17,5 24 41 57 76 125 (A)
connectable cross-sections of rigid and flexible cables: between 0,75 and 50 mm2(refer to tables on following pages)
maximum continuous service temperature: 85°C
protection degree of the terminals: IP20 (with wires connected)

SCAME's insulated wire connectors have clear or coloured che insulating casing. The clear casings provide the advance of allowing visual control of the connections,, while the coloured ones make for faster identification of the circuits.

The insulated wire connector are widely used for wiring purposes inside junction boxes and panels and for temporary connections in low voltage electrical systems.

With the pratical strip version, the wiring is also vry neat.

MULTI-WAY WIRE CONNECTORS - T85

Various versions are available, for equi-potential points, for earthing, in-out connections - easy and quick cabling for modern installations.

The main characteristics are:

rated voltage: 450V~
capacity: 6 16 35 (mm2)
rated current: 41 76 125 (A)
connectable cross-sections of rigid and flexible cable: between 1 and 35 mm2
maximum continuos service temperature: 85°C
protection degree of terminals IP 20 (with wires connected)

POLE TERMINAL STRIP

SCAME produces three versions of 12 pole rerminal strips withdifferent technical characteristics

TERMINAL STRIPS T140
The main characteristics of the terminals are:



rated voltages: 250 /450 /750 V~ (according to size)

capacity: 2,5 4 6 10 16 25 35 mm2

rated current: 24 32 57 76 101 125 A

connectable cross-sections of rigid and flexible cables: between 0,75 and 35 mm2 (refer to the "connecting capacity" tables on the following pages)

maximum continuous service temperature: 140°C

protection degree of the terminals: IP20 (with wires connected)
TERMINAL STRIPS T85
The main characteristics of terminals are:


rated voltage: 250 V~, 450 V~, 750 V~

capacity: 2,5 4 6 10 16 25 35mm2

rated current: 24 32 57 76 A

connectable cross-sections of rigid and flexiblecables: between 0,75 and 16 mm2 (refer to the "connecting capacity" tables on the following pages)

maximum continuous service service temperature: 85°C

protection degree of the terminals: IP20 (with wires connected)



The T140 and T85 are widely used for wire connections inside distribution boards, light fixtures and for the connection of permanently installed electrical equipment.


The T140 and T85 terminal strips are all ENEC approved, they comply to the international Standards IEC 60998-1 and IEC 60998-2-1. Products: fam. 810: Insulated wire connectors-single and in strips fam. 812: Insulate wire connectors strips fam. 815: Terminal strips fam. 817: Multi-way wire connectors